نبذة مختصرة : The Zhundong coalfield in Xinjiang contains vast reserves and is a crucial source of thermal coal. However, the Zhundong coal has a high content of alkali and alkaline earth metals, which makes it prone to ash deposition and slagging in boilers, thereby limiting its large-scale utilization. Fluidized-bed preheating is an emerging clean combustion technology that can reduce the slagging and fouling risks associated with high-alkali coal by modifying its fuel properties. This study employs circulating fluidized-bed preheating technology to treat high-alkali coal, with a focus on investigating the effect of the preheated air equivalence ratio on fuel preheating modification. Through microscopic characterization of both the raw coal and preheated char, the release and transformation behaviors of elements and substances during the preheating process are revealed. The results demonstrate that fluidized preheating promotes alkali metal precipitation, and increasing the preheated air equivalence ratio (λPr) enhances gas production and elemental release, with a volatile fraction mass conversion of up to 84.57%. As the λPr value increased from 0.28 to 0.40, the average temperature in the preheater riser increased from 904 °C to 968 °C. Compared to the raw coal, the specific surface area of the preheated char was enhanced by a factor of 3.6 to 9.1 times, with a more developed pore structure and less graphitization, thus enhancing the surface reactivity of the preheated char. The increase in λPr also facilitated the conversion from pyrrolic nitrogen to pyridinic nitrogen, thus improving combustion performance and facilitating subsequent nitrogen removal. These findings provide essential data support for advancing the understanding of preheating characteristics in high-alkali coal and for promoting the development of efficient and clean combustion technologies tailored for high-alkali coal.
Processing Request
No Comments.