نبذة مختصرة : For half a century, only Bi2Te3-based thermoelectrics have been commercialized for near room temperature applications including both power generation and refrigeration. Because of the strong layered structure, Bi2Te3 in particular for n-type conduction has to be texturized to utilize its high in-plane thermoelectric performance, leaving a substantial challenge in toughness. This work presents the fabrication and performance evaluation of thermoelectric modules based on n-type Ag2Se paring with commercial p-Bi2Te3. Ag2Se mechanically allows an order of magnitude larger fracture strain and thermoelectrically secures the module efficiency quite competitive to that of commercial one for both refrigeration and power generation within ± 50 K of room temperature, enabling a demonstration of a significantly tougher alternative to n-type Bi2Te3 for practical applications.
Rights: CC BY
URL: http://creativecommons.org/licenses/by/4.0/Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/ (http://creativecommons.org/licenses/by/4.0/) .
Processing Request
No Comments.