Item request has been placed! ×
Item request cannot be made. ×
loading  Processing Request

Behavioral Evaluation of Strengthened Reinforced Concrete Beams with Ultra-Ductile Fiber-Reinforced Cementitious Composite Layers

Item request has been placed! ×
Item request cannot be made. ×
loading   Processing Request
  • معلومة اضافية
    • بيانات النشر:
      MDPI
    • الموضوع:
      2023
    • Collection:
      PubMed Central (PMC)
    • نبذة مختصرة :
      In the literature, there is little information available regarding the behavior of composite beams made up of reinforced concrete (RC) and ultra-ductile fiber-reinforced concrete (UDFRC). In this study, UDFRC was examined for its effectiveness in enhancing the strength of RC beams. With a tensile strength of 4.35 MPa and a strain capacity of 2.5%, PVA-based UDFRC was prepared. The performance of 12 medium-sized reinforced concrete (RC) beams was measured under four-point flexural loading. The beams measured 1800 mm long, 150 mm wide, and 200–260 mm deep. The experimental program on beam specimens was divided into two phases. In the first, four 150 × 200 × 1800 mm RC beams with UDFRC layer thicknesses of 0, 30, 60, and 90 mm were tested. Additionally, four concrete and four concrete–UDFRC beams were investigated, measuring 150 × 230 × 1800 mm and 150 × 260 × 1800 mm, respectively. The study focused on medium-sized, slender RC beams under quasi-static loads and room temperature with additional or substituted UDFRC layers. As a result of replacing concrete with UDFRC, the load-carrying capacity at first crack and steel yield significantly increased between 18.4 and 43.1%, but the ultimate load-carrying capacity increased only in the range of 6.3–10.8%. Furthermore, beams with additional UDFRC layers could carry 30–50% more load than their concrete counterparts. An RC-UDFRC beam had a load-carrying capacity 10–15% greater than that of a comparable RC beam. Generally, there is a lower deflection response in UDFRC–concrete composite RC beams than in control concrete beams. The UDFRC layering can potentially improve the load-carrying capacity of RC beams, at least when ductility provisions are considered.
    • Relation:
      http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10342343/; http://dx.doi.org/10.3390/ma16134695
    • الرقم المعرف:
      10.3390/ma16134695
    • Rights:
      © 2023 by the authors. ; https://creativecommons.org/licenses/by/4.0/Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
    • الرقم المعرف:
      edsbas.A023F643