A performance study of a voltage-fed reluctance synchronous machine

Submitted to the Department of Electrical Engineering in Fulfilment of the Requirements for the Magister Technologiae in Electrical Engineering at the Cape Peninsula University of Technology SUPERVISOR: E. VOSS NOVEMBER 2013 ; The reluctance synchronous machine (RSM) operates on the principle of magnetic reluctance, which is produced through a careful selection of rotor flux barriers and cut-outs. Magnetic reluctivity is the resistance to magnetic flux and can be directly related to the principles of Ohm’s law in electrical circuits. Although reluctance motors have been known for more than 150 years, researchers lost interest when Nikola Tesla’s induction machine (IM) was introduced to industry. Over the last few decades, however, RSMs have shown a lot of potential. They are cheap, robust, reliable, and their rotors can also be used in the stators of IMs. The disadvantage of these machines is an inherently high torque ripple, being the result of its rotor geometry, but the biggest advantage is having a significant reduction in copper losses after the rotor cage has been removed. This advantage drove engineers to investigate, optimise and modify the performance and structure of this machine, which led to the usage of electronic drive systems. The recent advances in technology have allowed researchers to further investigate and modify the design and performance of this special type of machine, with the integration of Finite Element Analysis (FEA) software also making a contribution to the development of the RSM’s current driven systems. The voltage-fed RSM, driven direct-on-line (DOL) from the utility supply, was left in the shadows as the current-fed RSM took reign, but still is, in the author’s opinion, not yet fully analysed. This thesis practically investigates the performance characteristics of the cageless, voltage-fed 3kW RSM in its steady-state operation, under various loads. These performance characteristics are also compared to a RSM driven from a sensorless vector drive (current-fed) to investigate the ...