Mechanical behaviour of biodegradable AZ31 magnesium alloy after long term in vitro degradation

Biodegradable magnesium alloys including AZ31 are exciting candidates for temporary implants as they eliminate the requirement for surgical removal, yet have higher mechanical properties than degradable polymers. However, the very long term mechanical properties and degradation of these alloys have not been fully characterized. The tensile, bending and corrosion behaviour of biodegradable AZ31 Mg alloy specimens have been investigated for up to 9 months in vitro in phosphate buffered saline (PBS). Small AZ31 Mg specimens showed a significant drop in bend yield strength and modulus after 3 months in vitro degradation and an average mass loss of 6.1%. Larger dumbbell specimens showed significant drops in tensile strength from 251.96 ± 3.53 MPa to 73.5 ± 20.2 MPa and to 6.43 ± 0.9 MPa and in modulus from 47.8 ± 5.6GPa to 25.01 ± 3.4GPa and 2.36 ± 0.89GPa after 3 and 9 months respectively. These reductions were accompanied by an average mass loss of 18.3% in 9 months. Degradation rate for the small and large specimens followed similar profiles with immersion time, with peak degradation rates of 0.1747 g m− 2 h−1 and 0.0881 g m− 2 h−1, and average rates of 0.1038 g m− 2 h−1 and 0.0397 g m− 2 h−1 respectively. SEM fractography and polished specimen cross-sections revealed corrosion pits, cracks and corrosion induced defects. These data indicate the potential of AZ31 Mg for use in implants that require medium term degradation with load bearing mechanical properties.