Item request has been placed! ×
Item request cannot be made. ×
loading  Processing Request

Projektování odběratelské trafostanice na hladině VN/NN ; Consumer substation design at the HV/LV level

Item request has been placed! ×
Item request cannot be made. ×
loading   Processing Request
  • معلومة اضافية
    • Contributors:
      Chrobáček, Karel; Zajaczek, Stanislav
    • بيانات النشر:
      Vysoká škola báňská – Technická univerzita Ostrava
    • الموضوع:
      2023
    • Collection:
      DSpace VŠB-TUO (Vysoká škola báňská - Technická univerzita Ostrava / Technical University of Ostrava)
    • نبذة مختصرة :
      Tato práce pojednává o projektování trafostanice na hladině VN/NN. V běžné uspěchané praxi a s využitím různých softwarových prostředků mnozí projektanti zapomínají, že stále existují různé oblasti, ke kterým je nutné přistupovat poněkud jinak, než je tomu ,,běžně‘‘ k vidění. Mnohokrát se lze setkat s tím, že projektanti většinou v této problematice nic nepočítají a stále používají stejné a mnohdy chybné postupy, které nejsou v souladu s požadavky norem, a dokonce ani s technickou praxí. Proto jsem se rozhodl uvést práci na toto téma a poukázat na to, jak z hlediska norem a legislativy, a při použití konkrétních výpočtů, navrhnout kompletní odběratelskou trafostanici. Práce nebude zvlášť blízce rozebírat princip funkce transformátorů, ale naopak se zaměří na postup při jeho projektování z hlediska provozních požadavků. Téma má za úkol přiblížit postupy, které souvisí nejen s normativními a legislativními, ale především i s praktickými poznatky, se kterými jsem se během své pracovní praxe seznámil. ; This thesis deals with the design of a substation at the HV/LV level. In the normal hurried practice and with the use of various software tools, many designers forget that there are still various areas that need to be approached somewhat differently than what is ''normally'' necessary. Many times one can come across that designers usually do not calculate anything in this matter and still use the same and often erroneous procedures that are not in accordance with the requirements of the standards and even with technical practice. That's why I decided to present a work on this topic and point out how, from the point of view of standards and legislation, and using specific calculations, to design a complete substation. The work will not particularly closely discuss the principle of transformer function, but instead will focus on the procedure for its design from the point of view of operational requirements. The task of the topic is to bring closer the procedures that are related not only to normative and legislative ...
    • File Description:
      2044652 bytes; application/pdf
    • Relation:
      OSD002; http://hdl.handle.net/10084/150126; S2724; DVO0159_FEI_N0713A060015_2023
    • Rights:
      openAccess
    • الرقم المعرف:
      edsbas.E18D343D