نبذة مختصرة : The enhancement of the structure and mechanical properties of a Cu-3Si-Al ternary alloy by the addition of aluminum was achieved through careful alloy design and processing techniques. In this study, aluminium was introduced into the Cu-3Si binary alloy in concentrations of 0.1-5wt% and fabricated using stir-casting technique. The microstructural changes in the alloy were investigated using an optical metallurgical microscope (OM). The OM results show increased solid solution regions and finer grains in the Cu-3Si alloy doped with aluminium compared to the parent alloy (Cu-Si), leading to improvements of ultimate tensile strength, percentage elongation, and hardness, with maximum values of 314 MPa, 28%, and 278 BHN, respectively. Keywords: Alloy design; aluminium; Cu-Si-Al alloy; microstructure; properties. Title: Enhancing the structure and mechanical properties of Cu-3Si-Al ternary alloy by addition of aluminium Author: Agatha Ifeoma Ijomah, Kingsley Chidi Nnakwo, Eugene Ekedumogu Nnuka, Ifeanacho Uchenna Okeke International Journal of Novel Research in Engineering and Science ISSN 2394-7349 Vol. 10, Issue 2, September 2023 - February 2024 Page No: 7-11 Novelty Journals Website: www.noveltyjournals.com Published Date: 14-September-2023 DOI: https://doi.org/10.5281/zenodo.8344418 Paper Download Link (Source) https://www.noveltyjournals.com/upload/paper/Enhancing%20the%20structure%20and%20mechanical-14092023-4.pdf ; International Journal of Novel Research in Engineering and Science, ISSN 2394-7349, Novelty Journals, Website: www.noveltyjournals.com
No Comments.