نبذة مختصرة : The valorisation and reuse of waste materials can enhance the environmental sustainability of road constructions, especially by means of cold recycling techniques, which, moreover, allow to reduce polluting emissions in atmosphere. Among the various technological approaches, the use of bitumen emulsion to stabilize waste materials is very common, especially in case of reclaimed asphalt pavement (RAP) aggregates. However, even other types of waste materials could be considered using a Cold Central Plant Recycling (CCPR) approach. The paper discusses the main results of a laboratory investigation aimed to evaluate the mechanical performance of bitumen emulsion stabilized mixtures for road pavements base courses, prepared with RAP, steel slag, coal ash and glass wastes, used with various percentages. In a first step of the laboratory study, both physical and toxicological properties of each waste material have been investigated, in order to assess their environmental compatibility. Subsequently, an extensive mechanical analysis of the bitumen emulsion stabilized mixtures has been carried out in the laboratory, in terms of indirect tensile strength, indirect tensile stiffness modulus at three temperatures (10°C, 25°C, 40°C) and repeated load axial tests at 30°C. The moisture resistance of the mixes has been also investigated by means of indirect tensile strength tests carried out on soaked specimens. Very good results have been observed, depending on the mix composition: indirect tensile strength at 25 °C on dry specimens up to 0.52 MPa and stiffness modulus up to 4,056 MPa (at 25 °C, for a rise time equal to 124 ms). Therefore, it has been verified that the waste materials considered in the study can be successfully reused to completely substitute conventional aggregates in bitumen emulsion stabilized mixtures for road pavements base courses.
Processing Request
No Comments.