نبذة مختصرة : The return to the Moon is an important short-term goal of NASA and other international space agencies. To minimize mission risks, technologies, such as rovers or regolith processing systems, must be developed and tested on Earth using lunar regolith simulants that closely resemble the properties of real lunar soil. So far, no singular lunar simulant can cover the multitude of use cases that lunar regolith involves, and most available materials are poorly characterized. To overcome this major gap, a unique modular system for flexible adaptable novel lunar regolith simulants was developed and chemically characterized in earlier works. To supplement this, the present study provides comprehensive investigations regarding geotechnical properties of the three base regolith simulant systems: TUBS-M, TUBS-T, and TUBS-I. To evaluate the engineering and flow properties of these heterogeneous materials under various conditions, shear tests, particle size analyses, scanning electron microscope observations, and density investigations were conducted. It was shown that small grains <25 µm (lunar dust) are highly compressive and cohesive even at low external stress. They are particularly important as a large amount of fine dust is present in lunar regolith and simulants ( x 50 = 76.7 to 96.0 µm). Further, ring shear and densification tests revealed correlations with damage mechanisms caused by local stress peaks for grains in the mm range. In addition, an explanation for the occurrence of considerable differences in the literature-based data for particle sizes was established by comparing various measurement procedures. The present study shows detailed geotechnical investigations of novel lunar regolith simulants, which can be used for the development of equipment for future lunar exploration missions and in situ resource utilization under realistic conditions. The results also provide evidence about possible correlations and causes of known soil-induced mission risks that so far have mostly been described ...
No Comments.