Item request has been placed! ×
Item request cannot be made. ×
loading  Processing Request

Using Successive Self-nucleation and Annealing (SSA) to detect the solid-solid transitions in poly (hexamethylene carbonate) and poly (octamethylene carbonate) ; Using Successive Self-Nucleation and Annealing to Detect the Solid−Solid Transitions in Poly(hexamethylene carbonate) and Poly(octamethylene carbonate)

Item request has been placed! ×
Item request cannot be made. ×
loading   Processing Request
  • معلومة اضافية
    • Contributors:
      European Commission
    • بيانات النشر:
      ACS
    • الموضوع:
      2021
    • Collection:
      ADDI: Repositorio Institucional de la Universidad del País Vasco / Euskal Herriko Unibertsitatea (UPV/EHU - Basque Country University)
    • نبذة مختصرة :
      Unformatted post-print version of the accepted article ; Solid-solid transitions in poly (hexamethylene carbonate) (PC6) and poly (octamethylene carbonate) (PC8), denoted δ to α transition, have been investigated, using self-nucleation and Successive Self-nucleation and Annealing (SSA) technique. The SSA protocol was performed in-situ for thermal (differential scanning calorimetry (DSC)), structural (Wide-angle X-ray Scattering (WAXS)), and conformational (Fourier-transformed Infrared Spectroscopy (FT-IR)) characterization. The final heating after SSA fractionation displayed an enhanced (compared to a standard second DSC heating scan) endothermic and unfractionated peak signal at low temperatures corresponding to the δ to α transition. The improved (i.e., higher enthalpy and temperature than in other crystallization conditions) δ to α transition signal is produced by annealing the thickest lamellae made up by α and β phase crystals after SSA treatment. As thicker lamellae are annealed, more significant changes are produced in the δ to α transition, demonstrating the transition dependence on crystal stability, thus, on the crystallization conditions. The ability of SSA to significantly enhance the observed solid-solid transitions makes it an ideal tool to detect and study this type of transitions. In-situ WAXS reveals that the δ to α transition corresponds to a change in the unit cell dimensions, evidenced by an increase in the d-spacing. This implies a more efficient chain packing in the crystal, for both samples, in the δ phase (lower d-spacing at low temperatures) than in the α phase (higher d-spacing at high temperatures). The chain packing differences are explained through in-situ FT-IR measurements that show the transition from ordered (δ phase) to disordered (α phase) methylene chain conformations. ; We would like to acknowledge financial support provided by the National Key R&D Program of China (2017YFE0117800) and the National Natural Science Foundation of China (51820105005, 21922308, and ...
    • File Description:
      application/pdf
    • ISSN:
      0024-9297
      1520-5835
    • Relation:
      info:eu-repo/grantAgreement/EC/H2020/778092; info:eu-repo/grantAgreement/MINECO/MAT2017-83014-C2-1-P; Macromolecules 54(20) : 9670–9680 (2021); http://hdl.handle.net/10810/57319
    • الرقم المعرف:
      10.1021/acs.macromol.1c01856
    • الدخول الالكتروني :
      http://hdl.handle.net/10810/57319
      https://doi.org/10.1021/acs.macromol.1c01856
    • Rights:
      info:eu-repo/semantics/openAccess ; Copyright © 2021 American Chemical Society
    • الرقم المعرف:
      edsbas.7FC6633