Magneto-acoustic on-chip sensor design for the characterization of complex materials ; Développement d'un capteur magnéto acoustique on-chip pour la caractérisation des matériaux complexes

Acoustic and electromagnetic waves are key probing candidates for characterizing their propagation media with minimum perturbation. Often used with independent sensors based on specialized transducing materials, the approach developed here provides an on-ship multimodal sensor using the same sensing material for probing the acoustic and electromagnetic properties of the material. To meet a wide range of applications, the choice of the active piezoelectric element is carried out on an AT cut quartz. The study focuses on the steps leading in fine to an on-chip magneto-acoustic sensor with a contactless excitation.The theoretical study of a magneto-acoustic sensor inductively excited and loaded by a viscous fluid is first carried out. This sensor consists of three elements: a radio frequency (RF) sensor, a high quality factor RF resonator and a quartz on which two ring electrodes have been deposited. The complex viscosity of the studied material is derived from the electrical impedance of the complete system. The measurements carried on etalon viscoelastic materials show a good agreement with the theoretical results.The integration of the RF resonator on the piezoelectric element being via circular electrodes, a preliminary study is performed for determining the acoustic waves that can be generated in the quartz and their interaction with the electrodes. The laser vibrometry measurements indicate that Lamb waves are generated in a wide frequency range, from 100 kHz to 20 MHz. The analysis of the spatial pulse response of the sensor surface by 3D Gabor transform locates the source of these waves on the edge of the electrodes. Furthermore, the study of the disk at it fundamental frequency points out the high nonlinear mechanical behavior of the quartz.The plane RF multi-turn resonator and its integration on the quartz disk of the magneto-acoustic on-chip sensor are then studied. The experimental results of impedance and laser vibrometry measurements validate the proposed theoretical model. The selected frequency ...