Item request has been placed! ×
Item request cannot be made. ×
loading  Processing Request

Plasmonic Photocatalysts Based on Au Nanoparticles and WO3 for Visible Light-Induced Photocatalytic Activity

Item request has been placed! ×
Item request cannot be made. ×
loading   Processing Request
  • معلومة اضافية
    • Contributors:
      Laboratoire Interdisciplinaire Carnot de Bourgogne (ICB); Université de Technologie de Belfort-Montbeliard (UTBM)-Université de Bourgogne (UB)-Université Bourgogne Franche-Comté COMUE (UBFC)-Centre National de la Recherche Scientifique (CNRS); Institut des Matériaux, de Microélectronique et des Nanosciences de Provence (IM2NP); Aix Marseille Université (AMU)-Université de Toulon (UTLN)-Centre National de la Recherche Scientifique (CNRS); Matériaux divisés, interfaces, réactivité, électrochimie (MADIREL); Aix Marseille Université (AMU)-Institut de Chimie - CNRS Chimie (INC-CNRS)-Centre National de la Recherche Scientifique (CNRS); Université Mohammed V de Rabat Agdal (UM5)
    • بيانات النشر:
      HAL CCSD
      MDPI
    • الموضوع:
      2023
    • Collection:
      Université de Bourgogne (UB): HAL
    • نبذة مختصرة :
      International audience ; In this work, we report the application of Au/WO3 composite as a photocatalyst for the degradation of dyes under solar light irradiation. Au/WO3 nanocomposites were synthesized using an acid precipitation method followed by an impregnation/reduction at room temperature. Two composites were obtained by loading gold nanoparticles on two morphologies of nanostructured WO3, nanoplatelets (NP), and pseudospheres (PS). The elaboration parameters of the nanocomposites were optimized according to the gold mass percentage, the HAuCl4 precursor concentration, and the impregnation time. The structural, microstructural, and textural characterization were conducted using advanced techniques: XRD, SEM/TEM microscopies, and XPS and DRS spectroscopies. The optimal synthesis parameters are a 48 h impregnation of a five mass percentage of gold from a HAuCl4 precursor with a concentration of 10−3 mol·L−1. The obtained composites were formed with Au nanoparticles of 7 nm in size. The XRD analyses did not reveal any modification of the oxide supports structure after gold grafting, contrary to the sorption analyses, which evidenced a change in the state of the materials surface. XPS analysis revealed the reduction of W6+ ions into W5+, favoring the presence of oxygen vacancies. Furthermore, a localized surface plasmon resonance effect was observed in the composite at 540 nm. The photocatalysis results of several dye pollutants have shown a selective degradation efficiency depending on the charge of the polluting molecules, pH medium, and mass loading of the catalysts. At the native pH, the photocatalysis process is highly efficient on a cationic molecule, with a low adsorption capacity. Au/WO3 PS composite appears to be the most efficient, degrading almost the whole RhB and MB only in 60 min and 90 min, respectively, while, for the MO anionic dye, the degradation is more efficient in acidic medium (80%) than in basic medium (0%). Trap tests of the main active species were investigated and a photodecomposition ...
    • Relation:
      hal-04291134; https://hal.science/hal-04291134; https://hal.science/hal-04291134/document; https://hal.science/hal-04291134/file/catalysts-13-01333-v3.pdf
    • الرقم المعرف:
      10.3390/catal13101333
    • Rights:
      info:eu-repo/semantics/OpenAccess
    • الرقم المعرف:
      edsbas.7382E248