Item request has been placed! ×
Item request cannot be made. ×
loading  Processing Request

Effect of Molybdenum Disulphide Thin Films on Enhancing the Performance of Polycrystalline Silicon Solar Cells ... : تأثير أفلام ثاني كبريتيد الموليبدينوم الرقيقة على تعزيز أداء خلايا السيليكون الشمسية متعددة البلورات ...

Item request has been placed! ×
Item request cannot be made. ×
loading   Processing Request
  • معلومة اضافية
    • بيانات النشر:
      OpenAlex
    • الموضوع:
      2023
    • Collection:
      DataCite Metadata Store (German National Library of Science and Technology)
    • نبذة مختصرة :
      This research work focuses on augmenting the power conversion efficiency of the polycrystalline silicon solar cell with the aid of antireflection coating (ARC) of synthesized molybdenum disulphide (MoS2). The sol-gel technique and electrospraying method were preferred for synthesizing and depositing MoS2 as transparent thin films on the surface of the solar cells. The optical, electrical, structural, and thermal properties of the coated solar cells were analyzed for understanding the influence of the MoS2 coating. Five different samples (A-II, A-III, A-IV, A-V, and A-VI) were coated with varying coating time. Among them, 120 min coated sample experienced a maximum power conversion efficiency (PCE) of 17.96% and 18.82% under direct sunlight and neodymium light with resistivity as low as 2.79 × 10 − 3 Ω − cm . The investigation of optical properties of the coated solar cells revealed a maximum transmittance of 93.6% and minimum reflectance of 6.3%, achieved for A-IV sample in the visible UV spectrum. Sample ... : يركز هذا العمل البحثي على زيادة كفاءة تحويل الطاقة للخلية الشمسية السيليكونية متعددة البلورات بمساعدة الطلاء المضاد للانعكاس (ARC) لثاني كبريتيد الموليبدينوم المركب (MoS2). تم تفضيل تقنية sol - gel وطريقة الرش الكهربائي لتوليف وترسيب MoS2 كأغشية رقيقة شفافة على سطح الخلايا الشمسية. تم تحليل الخصائص البصرية والكهربائية والهيكلية والحرارية للخلايا الشمسية المطلية لفهم تأثير طلاء MoS2. تم طلاء خمس عينات مختلفة (A - II و A - III و A - IV و A - V و A - VI) بوقت طلاء مختلف. من بينها، شهدت العينة المطلية 120 دقيقة أقصى كفاءة لتحويل الطاقة (PCE) بنسبة 17.96 ٪ و 18.82 ٪ تحت ضوء الشمس المباشر وضوء النيوديميوم بمقاومة منخفضة تصل إلى 2.79 × 10 Ω -3 Ω - سم . كشف فحص الخصائص البصرية للخلايا الشمسية المطلية عن نفاذية قصوى بنسبة 93.6 ٪ وانعكاس أدنى بنسبة 6.3 ٪، تم تحقيقها لعينة A - IV في طيف الأشعة فوق البنفسجية المرئي. أظهرت العينة A - IV نتائج بارزة في تحليل درجة الحرارة مع درجات حرارة منخفضة تصل إلى 38.9 درجة مئوية في بيئات المصدر غير الخاضعة للرقابة و 43.2 درجة مئوية في بيئات المصدر الخاضعة للرقابة. أثبتت نتائج ...
    • Relation:
      https://dx.doi.org/10.60692/x5w56-hgg19
    • الرقم المعرف:
      10.60692/r1yjs-p7380
    • Rights:
      cc-by
    • الرقم المعرف:
      edsbas.6C3E86B