Efficient Pyrolysis of Low-Density Polyethylene for Regulatable Oil and Gas Products by ZSM-5, HY and MCM-41 Catalysts

In this research, catalytic cracking of low-density polyethylene (LDPE) has been carried out in the presence of three kinds of typical molecular sieves, including ZSM-5, HY and MCM-41, respectively. The effects of different catalysts on the composition and quantity of pyrolysis products consisting of gas, oil and solid material were systematically investigated and summarized. Specially, the three kinds of catalysts were added into LDPE for pyrolysis to obtain regulatable oil and gas products (H 2 , CH 4 and a mixture of C 2 –C 4 + gaseous hydrocarbons). These catalysts were characterized with BET, NH 3 -TPD, SEM and TEM. The results show that the addition of MCM-41 improved the oil yield, indicating that the secondary cracking of intermediate species in primary pyrolysis decreased with the case of the catalyst. The highest selectivity of MCM-41 to liquid oil (78.4% at 650 °C) may be attributed to its moderate total acidity and relatively high BET surface area. The ZSM-5 and HY were found to produce a great amount of gas products (61.4% and 67.1% at 650 °C). In particular, the aromatic yield of oil production reached the maximum (65.9% at 500 °C) when the ZSM-5 was used. Accordingly, with the three kinds of catalysts, a new environment-friendly and efficient recovery approach may be developed to obtain regulatable and valuable products by pyrolysis of LDPE-type plastic wastes.