Item request has been placed! ×
Item request cannot be made. ×
loading  Processing Request

Cyclic olefin polymer as a novel membrane material for membrane distillation applications

Item request has been placed! ×
Item request cannot be made. ×
loading   Processing Request
  • معلومة اضافية
    • بيانات النشر:
      Elsevier B. V.
    • الموضوع:
      2021
    • Collection:
      Universidad Complutense de Madrid (UCM): E-Prints Complutense
    • الموضوع:
      536
    • نبذة مختصرة :
      The authors gratefully acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness through its project CTM2015-65348-C2-2-R, the Spanish Ministry of Science, Innovation and Universities through its project RTI2018-096042-B-C22 and also Sarkhoon and Qeshm Gas Refinery Company of Iran (No. 266270). ; A first attempt was made to prepare cyclic olefin polymer/copolymer (COP/COC) flat-sheet porous membranes by the well-known non-solvent induced phase separation method. In this study, two solvents (chloroform and 1,2,4-trichlorobenzene), different additives (polyvinylpyrrolidone, PVP, polyethylene glycol, PEG400, polyethylene oxide, PEO, and Sorbitan monooleate, Span 80) and coagulants (acetone and 70/30 wt% acetone/water mixture) were employed. The prepared membranes were characterized in terms of the thickness (70-85 mu m), porosity (-50-80%), liquid entry pressure (1.16-4.55 bar), water contact angle (similar to 86 degrees - 111 degrees), mean pore size (158-265 nm), mechanical properties (tensile strength: 0.74-5.51 MPa, elongation at break: 3.34%-7.94% and Young's modulus: 29-237 MPa), morphological and topographical characteristics. Short-term direct contact membrane distillation (DCMD) tests showed maximum permeate fluxes of 20 kg m(-2) h(-1) and 15 kg m(-2) h(-1) when using as feed distilled water and 30 g/L sodium chloride aqueous solution, respectively, with a high salt separation factor (99.99%). Long-term DCMD tests of some selected membranes carried out during 24-50 h showed that the membranes prepared with PEG additive exhibited more stable DCMD performance. In general, it was proved that COP can be successfully used as a novel polymer candidate in membrane distillation (MD) applications. ; Depto. de Estructura de la Materia, Física Térmica y Electrónica ; Fac. de Ciencias Físicas ; TRUE ; Ministerio de Economía y Competitividad (MINECO) ; Ministerio de Ciencia e Innovación (MICINN) ; Sarkhoon and Qeshm Gas Refinery Company of Iran ; pub
    • File Description:
      application/pdf
    • ISSN:
      0376-7388
    • Relation:
      CTM2015-65348-C2-2-R; RTI2018-096042-B-C22; 266270; https://doi.org/10.1016/j.memsci.2020.118845; https://www.sciencedirect.com/; https://hdl.handle.net/20.500.14352/8277
    • الرقم المعرف:
      10.1016/j.memsci.2020.118845
    • الدخول الالكتروني :
      https://hdl.handle.net/20.500.14352/8277
      https://doi.org/10.1016/j.memsci.2020.118845
      https://www.sciencedirect.com/
    • Rights:
      open access
    • الرقم المعرف:
      edsbas.3D7AEBE4