Item request has been placed! ×
Item request cannot be made. ×
loading  Processing Request

UV Aging in Plastics

Item request has been placed! ×
Item request cannot be made. ×
loading   Processing Request
  • معلومة اضافية
    • Contributors:
      Yrkeshögskolan Arcada
    • بيانات النشر:
      Yrkeshögskolan Arcada
    • الموضوع:
      2018
    • Collection:
      Theseus.fi (Open Repository of the Universities of Applied Sciences / Ammattikorkeakoulujen julkaisuarkisto)
    • نبذة مختصرة :
      The purpose of this thesis is to find out the expected lifetime of radiation aged ther-moplastic material. The method is to irradiate PET and PP with UV radiation and measure the rate of degradation. The thesis focuses on the physical properties of the material and how UV radiation breaks bonds and/or cures the material. The UV source is a metal halide lamp and universal testing machine is used to record the properties of the samples. The samples are standardized dog bones. The plastics of the samples are tested for standard deviation. Then samples are exposed to UV light for ten hours and again tested for standard deviation to get knowledge of if the quality is good enough for the test. The samples are then exposed for a longer interval and periodically tested for stress strain and Young’s modulus. The intervals are chosen in reference to the ten-hour exposure test. The result showed that both plastics degraded. Both PP and PET got stiffer and PET got stiff to the point that the material shattered. PP had a change of color that is a clear sign of change in the electron configuration. PET warped a lot but is not a result of uneven degradation due to the material being more transparent than PP. ; UV-degradering av plaster Detta arbete är utfört för att fastställa den förväntade livslängden för plaster. Genom att bestråla plastbitar med starkt UV-ljus kan man på kort sikt mäta degradering. Metoden går ut på att två olika plaster föråldras och testas för mekanisk spänning, deformation och elasticitetsmodul. Med hjälp av resultaten kan man räkna ut raten av degradering. Plasterna PET och PP testas och med hjälp av olika plaster får man information om plaster föråldras på liknande sätt. Arbetet består av tre tester. Först testar man egenskaperna hos obestrålade provbitar i ett dragtest utfört med en universell testmaskin. Detta gör man för att få fram standardavvikelsen som behövs för att räkna ut kvaliteten på plasterna. De obestrålade provbitarna jämförs sedan med provbitar bestrålade i tio timmar för att se om ...
    • Relation:
      URN:NBN:fi:amk-2018052910813; http://www.theseus.fi/handle/10024/148610; 10024/418
    • Rights:
      All rights reserved
    • الرقم المعرف:
      edsbas.3A7C6BD0