نبذة مختصرة : In order to solve the difficulty in localization and poor signal-to-noise ratio (SNR) of the angled shear vertical wave (SV wave) electromagnetic acoustic transducer (EMAT) in cracks detection of high-temperature carbon steel forgings, a finite element (FE) model of the angled SV wave EMAT detection process was established, and the influence of specimen temperature on the EMAT excitation, propagation, and reception processes was analyzed. A high-temperature resistant angled SV wave EMAT was designed to detect carbon steel from 20 °C to 500 °C, and the influence law of the angled SV wave at different temperatures was analyzed. Then a circuit-field coupled FE model of angled SV wave EMAT in the carbon steel detection process based on the Barker code pulse compression technique was established, and the effects of the Barker code element length, impedance matching method, and matching component parameters on the pulse compression effect were analyzed. In addition, the noise suppression effect and the SNR of the crack-reflected wave in the tone-burst excitation method and the Barker code pulse compression technique were compared. The results show that the amplitude of the block-corner reflected wave decreases from 556 mV to 195 mV, and the SNR decreases from 34.9 dB to 23.5 dB when the specimen temperature increases from 20 °C to 500 °C. When the temperature is 500 °C, the SNR of the crack-reflected wave obtained by the Barker code pulse compression technique can be improved by 9.2 dB compared to the tone-burst excitation method with 16 synchronous averages. The study can provide technical and theoretical guidance for online crack detection for high-temperature carbon steel forgings.
No Comments.