نبذة مختصرة : Purpose There is a novel surgical procedure, called cervicosacropexy (CESA) and vaginosacropexy (VASA) to treat pelvic organ prolapse and a concomitant urgency and mixed urinary incontinence. As there is little experience with the tapes so far and literature is scanty, the aim of this study was to investigate biomechanical properties for the fixation of the PVDF-tapes with three different fixation methods in context of apical fixations. Methods Evaluation was performed on porcine, fresh cadaver sacral spines. A total of 40 trials, divided into 4 subgroups, was performed on the anterior longitudinal ligament. Recorded biomechanical properties were displacement at failure, maximum load and stiffness in terms of the primary endpoints. The failure mode was a secondary endpoint. Group 4 was a reference group to compare single sutures on porcine tissue with those on human tissue. Biomechanical parameters for single sutures on the human anterior longitudinal ligament were evaluated in a previous work by Hachenberg et al. Results The maximum load for group 1 (two single sutures) was 65 ± 12 N, for group 2 (three titanium tacks arranged in a row) it was 25 ± 10 N and for group 3 (three titanium tacks arranged in a triangle) it was 38 ± 12 N. There was a significant difference between all three groups. The most common failure mode was a “mesh failure” in 9/10 trials for groups 1–3. Conclusion The PVDF-tape fixation with two single sutures endures 2.6 times more load than titanium tacks arranged in a row and 1.7 times more load than titanium tacks arranged in a triangle. The presacral fixation with titanium tacks reduced surgical time compared to the fixation with sutures, nevertheless sutures represent the significantly stronger and cheaper fixation method.
Rights: CC BY
URL: http://creativecommons.org/licenses/by/4.0/Open AccessThis article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/ (http://creativecommons.org/licenses/by/4.0/) .
Processing Request
No Comments.