Mechanical and microstructural evaluation of aluminium matrix composite reinforced with wood particles

Aluminium-wood particle composites were formed by casting method. Different weight fractions of wood particle as reinforcement to the Aluminium alloys were used to produce the composites. The physical and mechanical properties such as density, impact strength, tensile strength, hardness and microstructure were investigated. The results showed that the density decreases with the percentage increase in reinforcement. Also, a significant enhancement in the ultimate tensile strength (UTS) of the composite compared to that of pure aluminium was achieved. The maximum UTS of the Aluminium -wood composite is 97.69 MPa and occurred at 20%wt wood particulate addition reinforcement while that of the unreinforced Aluminium is 40.189 MPa. The impact energy varies from 47.00 J to 89.00 J with a maximum value at 10%wt wood particulate addition while the hardness varies from 52.33BHN to 62BHN with a maximum value at 10%wt. All the mechanical behaviours investigated in the study generally showed that the Aluminium -wood composite exhibited better mechanical properties than the pure Aluminium. The microstructure examination revealed that the wood particles were uniformly distributed in the metal matrix composite.