Pollutant Emissions and Heavy Metal Migration in Co-Combustion of Sewage Sludge and Coal.

The treatment of sewage sludge has become a global concern. Large amounts of sewage sludge can be disposed of by burning coal-mixed sludge. Thermogravimetric analysis and lab-scale combustion experiments in a drop tube furnace were utilized to study the combustion characteristics, pollutant emissions, and heavy metal migration during the co-combustion of coal and sewage sludge. The results showed that the blended fuels with a sewage sludge content less than 10 weight percent exhibited coal-like combustion characteristics. Additionally, the additional sewage sludge favored the ignition performance of blended fuels. When sewage sludge was added, the SO2 emissions rose to 76 mg/Nm³ under the 10% sludge condition—nearly three times higher than that of coal alone. While NOx emissions stayed mostly unchanged, HCl and HF emissions were very low. Meanwhile, Cr, Cu, and Ni migrated to the bottom ash, and their concentrations were all reduced with an increase in sewage sludge. Pb, Cd, Cr, Cu, Ni, and Hg migrated to the flue gas, mostly in the form of gaseous components. The results provide crucial information in the co-combustion of sewage sludge and coal, with implications in the development and improvement of large-scale, harmless, and resource-recovering techniques for waste sludge. [ABSTRACT FROM AUTHOR]

Copyright of Energies (19961073) is the property of MDPI and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)