Using a stair horizontal-vertical illusion to increase foot clearance over an inconsistently taller stair-riser.

Introduction: Stair falls can be caused by inconsistent stair dimensions. During ascent, inconsistently taller stair risers lead to reduced foot clearances as the inconsistency goes unnoticed. A stair horizontal-vertical illusion increases perceived riser heights and foot clearance and could offset reduced foot clearances over inconsistently taller risers, though this might impact other stair safety measures. Method: Twelve participants (age: 22 (3) years) ascended a seven-step staircase under three conditions: i) all steps consistent in riser height (consistent), ii) a 1cm increase in step 5 riser height (inconsistent) and iii) a 1cm increase in step 5 riser height, superimposed with a stair horizontal-vertical illusion (illusion). Vertical foot clearance, foot overhang, and margins of stability were assessed over step 4, 5 and 6. Perceived riser height due to the illusion was determined through a computer perception test. A One-Way Repeated Measures ANOVA compared biomechanical variables between conditions. A One Sample t test compared perceived riser height to the true height. Results: Over the inconsistent step 5, foot clearance reduced by 0.8cm compared to consistent. Illusion increased foot clearance by 1.1cm and decreased foot overhang by 4% compared to inconsistent. On step 4 the illusion led to more anterior instability compared to inconsistent. Illusion and inconsistent led to more mediolateral stability compared to consistent. The illusion increased perceived riser height by 12%. Discussion: Foot clearance reductions over inconsistently taller risers can be offset by a stair horizontal-vertical illusion. Additional benefits included a safer foot overhang and unaffected stability over the inconsistent riser. Changes to step 4 stability might have resulted from leaning forward to look at the step 5 illusion. The stair horizontal-vertical illusion could be a practical solution for inconsistently taller stair risers, where a rebuild is usually the only solution. [ABSTRACT FROM AUTHOR]